Abstract Data ADE-20 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Abstract Data ADE-20. Abstract Data ADE-20 4 halaman. Multi-mode vcf 2 pole, 12db, multi-mode, voltage controlled filter with simultaneous low, high, band and all-pass outputs and complete cv control

Halaman Cetak

2: Rear

1V OCT CALIBRATION: User adjustment and fine-tuning of 1V OCT response

MAIN CALIBRATION:

POWER CONNECTOR:

This single trimmer can be adjusted clockwise to increase

the frequency range available with 1V OCT tracking

(i.e. if the tuning is flat) or it can be adjusted counter-clockwise

to decrease the frequency range available with 1V OCT tracking

(i.e. if the tuning is sharp)

(Please see 'CALIBRATION' on page 4 of this guide)

Factory calibration for overall filter response and performance

Please do not make any changes to the settings of these trimmers

(Please see 'CALIBRATION' on page 4 of this guide)

Doepfer-style 16-pin IDC Socket. The ADE-20 uses the Doepfer standard

for power connection and cable orientation. The RED stripe on the supplied

power cable connects to the NEGATIVE (-12V) rail on the ADE-20 with the

RED stripe facing DOWN. This is marked on the back of the ADE-20 PCB

as "-12 RED"

(Please see 'PRECAUTIONS' on page 4 of this guide)

http://www.abstractdata.biz

[email protected]

Page 3 of 4

Version 1.1 December 2012