Abstract Data ADE-20 사용자 설명서 - 페이지 3
{카테고리_이름} Abstract Data ADE-20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-20 4 페이지. Multi-mode vcf 2 pole, 12db, multi-mode, voltage controlled filter with simultaneous low, high, band and all-pass outputs and complete cv control
페이지 인쇄
2: Rear
1V OCT CALIBRATION: User adjustment and fine-tuning of 1V OCT response
MAIN CALIBRATION:
POWER CONNECTOR:
© 2012 Abstract Data Ltd.
This single trimmer can be adjusted clockwise to increase
the frequency range available with 1V OCT tracking
(i.e. if the tuning is flat) or it can be adjusted counter-clockwise
to decrease the frequency range available with 1V OCT tracking
(i.e. if the tuning is sharp)
(Please see 'CALIBRATION' on page 4 of this guide)
Factory calibration for overall filter response and performance
Please do not make any changes to the settings of these trimmers
(Please see 'CALIBRATION' on page 4 of this guide)
Doepfer-style 16-pin IDC Socket. The ADE-20 uses the Doepfer standard
for power connection and cable orientation. The RED stripe on the supplied
power cable connects to the NEGATIVE (-12V) rail on the ADE-20 with the
RED stripe facing DOWN. This is marked on the back of the ADE-20 PCB
as "-12 RED"
(Please see 'PRECAUTIONS' on page 4 of this guide)
http://www.abstractdata.biz
Page 3 of 4
Version 1.1 December 2012