daltile One Quartz Series Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perabotan Dalam Ruangan daltile One Quartz Series. daltile One Quartz Series 15 halaman. Fabrication instructions
Halaman CetakDaltile
Basic Machinery
ONE Quartz fabrication shops should be fitted with machinery designed to work with natural
quartz surfaces while providing the highest quality possible. Consideration of heavy equipment
should be carefully researched and implemented before working with ONE Quartz.
The following chart briefly describes some of the basic heavy machinery used in a fabrication
shop. The type of machinery in each shop will differ according to individual needs, and
state/federal requirements for safety.
10
Saw
(Bridge Saw)
CNC Machine
Line Polisher
(Single Head)
Line Polisher
(Multi Head)
Handling Equipment
Water Treatment
Air Compressor
ONE Quartz
This is the most important piece of equipment.
Bridge saws will cut full slabs of material with
greater accuracy, precision, and speed than
conventional hand tools. Bridge saws can have
many different options ranging from manual to
fully automated.
Computer Numerically Controlled (CNC)
Technology.
The CNC mill (router) uses digital templates or
measurements to automatically cut out, profile,
and polish the perimeter of a piece and internal
cutouts such as sink holes, etc.
Machine designed to profile and polish edges in a
straight line only.
Similar function as the single head polisher but it is
capable of much higher production rates.
Overhead gantries and jib booms facilitate the
movement of material around the shop and the
ability to load pieces on the machines without the
necessity of forklifts in space prohibitive areas.
A system of pumps, filters and settlement tanks
used for the recirculation of shop water.
Used to supply machines and pneumatic hand
tools with sufficient air pressure and volume to
operate efficiently.