daltile One Quartz Series 설치 매뉴얼 - 페이지 10

{카테고리_이름} daltile One Quartz Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. daltile One Quartz Series 15 페이지. Fabrication instructions

Daltile

Basic Machinery

ONE Quartz fabrication shops should be fitted with machinery designed to work with natural

quartz surfaces while providing the highest quality possible. Consideration of heavy equipment

should be carefully researched and implemented before working with ONE Quartz.

The following chart briefly describes some of the basic heavy machinery used in a fabrication

shop. The type of machinery in each shop will differ according to individual needs, and

state/federal requirements for safety.

Saw

(Bridge Saw)

CNC Machine

Line Polisher

(Single Head)

Line Polisher

(Multi Head)

Handling Equipment

Water Treatment

Air Compressor

ONE Quartz

This is the most important piece of equipment.

Bridge saws will cut full slabs of material with

greater accuracy, precision, and speed than

conventional hand tools. Bridge saws can have

many different options ranging from manual to

fully automated.

Computer Numerically Controlled (CNC)

Technology.

The CNC mill (router) uses digital templates or

measurements to automatically cut out, profile,

and polish the perimeter of a piece and internal

cutouts such as sink holes, etc.

Machine designed to profile and polish edges in a

straight line only.

Similar function as the single head polisher but it is

capable of much higher production rates.

Overhead gantries and jib booms facilitate the

movement of material around the shop and the

ability to load pieces on the machines without the

necessity of forklifts in space prohibitive areas.

A system of pumps, filters and settlement tanks

used for the recirculation of shop water.

Used to supply machines and pneumatic hand

tools with sufficient air pressure and volume to

operate efficiently.