DAN NTP TECHNOLOGY DAD Thunder Core 256 Panduan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Perekaman DAN NTP TECHNOLOGY DAD Thunder Core 256. DAN NTP TECHNOLOGY DAD Thunder Core 256 16 halaman. Thunderbolt 3, dante, madi and adat digital audio interface

Halaman Cetak

Installation Guide Core 256

he selection of either of the two recovery modes are fixed after selection. The AX64 will start with a basic boot

software and IP configuration. The AX64 will not be operational until a proper firmware has been downloaded

via the DADman software and it has been restarted. By enabling recovery mode with default IP address and

network configuration the unit can always be identified on a network via the default setup.

Note that the IP address referred to is the IP address of the controller/management interface of the

unit. This is not the IP address of the IP audio interface if a such is installed. This IP address cannot

be accessed in recovery or restore defaults mode.

Specifications

Digital I/O formats/ Supported sample rate

Synchronisation

Interfaces

Latency

Channels and Sample rates per link

Doc no. AXCNTR-8001-A-4

and Green LED is

network, the AX64 will default to IP address

10.0.7.20 / 255.255.0.0 after approx. 2 minutes.

Green LED

turns OFF

Digital I/O and Synchronisation

Dante™ IP audio and ADAT/SMUX up to 192 kHz

Thunderbolt 3 and MADI up to 384 kHz

DADLink up to 384 kHz

Word Clock, Video Blac Burst, Dante, ADAT and MADI

Network Interface

1000BASE-T, RJ45 connector, 4-pair connection

Thunderbolt 3 Interface

2 x USB-C type connectors, supporting link functionality

and 15w power on each port.

DADLink Interface

2 x SFP connectors for Gigabit SFP modules for multi-

mode LC optical fibre connection.

Below 1 microsecond latency between interconnected

units. The overall latency is defined by the system delay

set for all the units which is normally 7 samples. All I/O

connections across units are 100% aligned in phase.

128 channels

64 channels

32 channels

16 channels

Double channel count by using two fibre links.

Rev. date 201123

@44.1 and 48 kHz

@88.2 and 96 kHz

@176.4 and 192 kHz

@352.8 and 384 kHz

Page 15 of 16