DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Perekaman DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center. DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center 19 halaman. Thunderbolt 3, dante, madi and adat modular analogue & digital audio interface
Halaman CetakInstallation Guide AX Center
Installation of DAD Thunderbolt 3 driver for MacOS
The driver software has to be installed completely before it can work properly.
When you install the driver, it is of no importance whether you have units or other peripherical
devices connected to the Thunderbolt 3 / USB-C port on the computer. In the process described
below there are no devices connected before installation.
The installation sequence:
1. Copy the driver .pkg file to the computer desktop and double click to start the installation.
2. Follow the installation instructions. Click Next and then Install.
3. Enter Administrator password and click Install.
4. If the driver has not been installed before on the computer, you get the message "System extension
blocked". Click on Open Security Preferences.
5. In the "Security and Privacy" window you have to click on the lock symbol in the bottom left corner and
unlock settings and click Allow.
6. Restart the Computer and open the Thunderbolt 3 driver application and connect the DAD
Thunder|Core interface to the USB-C/Thunderbolt 3 port on the Computer. Make sure that you are
using a high-speed (20Gbps) Thunderbolt 3 USB-C cable.
For mor information how to install and configure the Thunderbolt 3 driver please refer to the Thunder|Core
installation guide on www.digitalaudiosupport.com.
Once the driver is installed the device can be attached to via the setup window.
Doc no. AXCNTR-8001-A-4
Figure 4, DADDriver setup window for MacOS
Rev. date 221023
Page 9 of 19