Anyload DD-KC1 Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Anyload DD-KC1. Anyload DD-KC1 11 halaman. Digital weight indicator
Juga untuk Anyload DD-KC1: Panduan Pengoperasian (13 halaman)
Halaman Cetak
sampling.
AC
The batteries are brownout.
Err-0
1. Lost the calibration data.
2. The load cell or main board
maybe damaged.
Err-1
1.The weight is over the max
capacity.
2. Lost the calibration data.
3. The load cell or main board
maybe damaged.
--L--
Lower limit alarm
--H--
Upper limit alarm
7. Maintenance of Scale
In order to keep the scale's normal operating, the crust of indicator and the platform
of scale should be kept clean and prevented from corrosion by foreign substance. If
necessary, you should use a piece of cloth with mild washing agent to clean them.
When you don't use the scale, pull out the A/C plug. If not being used in a long time,
please take out the batteries.
8. Troubleshooting
Trouble
No display
Low-voltage
indication
Error in weighing
data-reading
False calibration
Page 10 of 11
Table 5
Cause
The power plug is not
inserted in the right place.
The batteries are expired.
The batteries power is low.
The scale didn't back to
zero before using.
The scale is not calibrated.
The calibration weight is not
precise.
1. Use new batteries.
2. Use power adapter.
1. Re-calibrate.
2. Change the Loadcell or
main board.
1. Remove the objects on the
platform.
2. Re-calibrate.
3. Change the load cell or
main board.
1.cancel lower limit alarm
1.cancel upper limit alarm
Insert the plug in right place.
Use the new batteries.
Use the new batteries.
Do not put objects on the platform,
press
to weigh.
Re-calibrate.
Use the precise calibration weight.
Anyload-manual-indicator-DD-KC1-en-101
Solution
button, and then begin