Anyload DD-KC1 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Anyload DD-KC1. Anyload DD-KC1 11 halaman. Digital weight indicator
Juga untuk Anyload DD-KC1: Panduan Pengoperasian (13 halaman)

Halaman Cetak

windows. Select the connected portal number "COM" and set the baud rate as

9600bps, the parity bit as "NONE", the data bit as "8Bit", and the stop bit as

"1Bit".

c. You can select the serial output modes according to your own needs. The

output modes include 3 types: output by pressing

output after the weight keeps stable, and continuous output. You can set

though the "out" in "Parameter setting".

d. Output Data Form: 8 bytes data bit + 3 bytes unit code + 2 bytes ending code.

The above-mentioned characters are all ASCII codes, and the unit can be kg, lb

or pcs.

e. The serial ports order can be f0und in Chapter 2 "button function".

Example of Output Data：

Display

123.45kg

Blank

-123.45lb

Blank

123.0pcs

Blank

4.10 When the scale is on, press and hold

then release. That means open or close the function of animal weighing. When the

action symbol which is above the units symbol flashes, that means the current mode is

animal mode. in this state, once the weighing is locked, it will automatically remain

locked weighs for about 10 seconds.

5．Set User Parameter

a) Wheb the scale is off, please press

to turn on the scale. Do not release the

"------"；

b) Press the

c) Press the

d) After entering the display menu, press the

Page 8 of 11

Data Bit

Blank

button to switch the menu；

button to enter the display menu；

key until the display "0FF" or "ON",

button together with the

button until the screen displays

Anyload-manual-indicator-DD-KC1-en-101

button, automatic

Unit Code

Ending Code

Blank

button to select the

button