AnyLoadg P1 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori AnyLoadg P1. AnyLoadg P1 8 halaman. Weighing indicator

S5: Zero Range

Select the range within which the scale can be zeroed.

0: 0%

1: 4%

2: 10%

3: 20%

4: 40%

S6: Change Password

When the indicator shows 0P 000, input the old password. When the

indicator shows nP 000, input the new password.

S7: A/D Count

P1: Zero Calibration A/D Count

P2: Capacity Calibration A/D Count

It's recommended not to change these numbers.

S8: Power Saving Mode

OFF 1: Enable

OFF 0: Disable

S9: Display Division Switching

dd 1: Enable

dd 0: Disable

3. Calibration

The calibration of P1 indicator consists of the following steps:

Zero calibration

Entering the test weight value

Capacity calibration

Zero Calibration: Set the indicator to Normal Weighing Mode. Press

to zero the scale.

Entering the test weight value: Set the indicator to Configuration

Mode—F9—Input Password (Default password 111)—S4, enter the test

> D

^ t> W