AnyLoadg P1 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori AnyLoadg P1. AnyLoadg P1 8 halaman. Weighing indicator

Halaman Cetak
weight value.
Capacity Calibration: After the test weight is put on the scale and the
scale is stable, press
return to Normal Weighing Mode, the calibration is completed.
4.Weighing Data Processing
4.1. Accumulate Weighing Data
After the scale reading is stable and
accumulate the weighing, the indicator will shown total weight and
cumulate number in sequence.
Note:
Zero and negative weighing data cannot be counted;
The weighing data can only be saved after the scale reading is
stable;
One weighing data can only be counted for one time.
The maximum cumulate number is 99;
If the wrong data is counted, press
After the weighing data is saved in the indicator:
Press
, the indicator will show total weight.
Press
again, the indicator will show total cumulate number.
4.2. Erase The Stored Weighing Data
The weighing data can be erased single weighing data at a time or all
weighing data at a time.
Press
, the indicator will show "CLL
from 1 and 2.
1--- Erased single weighing data;
2--- Erased all the weighing data.
Press
to confirm, the indicator will show "END" after the erasing is
complete.
W
to save the calibration, then the indicator will
symbol is shown, press
to clear the wrong data.
1", press"
" or"
" to switch
> D
^ t> W
to