Concoa 529 5106-01-220 Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Sistem Keamanan Concoa 529 5106-01-220. Concoa 529 5106-01-220 13 halaman.

Halaman Cetak

CONNECTING THE OUTPUT

The Single Station Remote Alarm activates a set of relay contacts in response to an alarm condition. This set

of relay contacts can be connected to any external device that is activated by the opening or closing of a switch.

Examples would be CONCOA's telephone dialer, a Warning Light, an external buzzer, or another monitoring

or alarm system. Whatever the connecting device, care must be taken not exceed the rating of the relay contacts

(Table 3). Refer to Table 4 for the pin assignments for the Output Connector.

Pin Number

Table 3

Relay Contact Rating

24 VDC

115 VAC

Cable Retainer Tabs

Cable Cover

Cable Retainer

Figure 7

Table 4

Function

Relay Output

Unused

notch

Figure 8

1 amp Resistive Load

0.5 amp Resistive Load

Locking Nut

Contact

Common (C)

Normally Closed (N.C.)

Normally Open (N.O.)

-7-

Plug