ABTronic PTZ-715WP Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan ABTronic PTZ-715WP. ABTronic PTZ-715WP 7 halaman. Outdoor ptz camera

Transmision baudrate settings:

1200 b/s

●

2400 b/s

●

4800 b/s

●

9600 b/s

●

Protocol settings:

PELCO-P

●

PELCO-D

●

2.2 RS-485 interface configuration

ATTENTION: Requires the PCR-485/P remote control kit.

To set data transmission parameters using RS-485 interface, set the DIP10 to position OFF

and use the PCR-485/P remote control kit.

Switches configuration

●

RS-485 interface configuration

●

After connect the PCR-485/P remote control kit you have to set the required parameters, and next

execute the following keys combination:

1. Keep pressed the PRESET key for 3 seconds,

2. Press the SETUP key.

After this sequence of operations the device will confirm the end of configuration procedure

by display the „OK" information.

Example: 2+4+16 = 22. Address is 22.

DIP7 = ON, DIP8 = OFF

DIP7 = OFF, DIP8 = OFF

DIP7 = ON, DIP8 = ON

DIP7 = OFF, DIP8 = ON

DIP9 = ON

DIP9 = OFF

DIP10 = ON

DIP10 = OFF