Duerkopp Adler 550-16-26 Panduan Petunjuk Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Jahit Duerkopp Adler 550-16-26. Duerkopp Adler 550-16-26 19 halaman. Sewing lamp led
Juga untuk Duerkopp Adler 550-16-26: Petunjuk Pemasangan (2 halaman), Panduan Petunjuk Pengoperasian (12 halaman)
Halaman Cetak
4.4 Setting the Thread Regulator
10
7
6
Caution Risk of Injury !
Turn the main switch off .
Set the thread regulator only with the sewing machine turned off.
The needle thread quantity required for stitch formation is regulated by
the thread regulator 6.
Only a precisely set thread regulator assures an optimal sewing result.
With a correct setting the needle thread loop must glide over the
thickest part of the hook with a light tension.
–
Loosen screw 5.
–
Set the position of the thread regulator.
–
Tighten screw 5.
Setting note:
When the largest thread quantity is required, the check spring 7 must
be pulled up approx. 0.5 mm from its upper end position. This is the
case when the needle thread loop passes the maximum hook
circumference.
5