Duerkopp Adler 550-16-26 Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Duerkopp Adler 550-16-26. Duerkopp Adler 550-16-26 19 pagina's. Sewing lamp led
Ook voor Duerkopp Adler 550-16-26: Montage-instructies (2 pagina's), Gebruiksaanwijzing (12 pagina's)
Pagina afdrukken
4.4 Setting the Thread Regulator
10
7
6
Caution Risk of Injury !
Turn the main switch off .
Set the thread regulator only with the sewing machine turned off.
The needle thread quantity required for stitch formation is regulated by
the thread regulator 6.
Only a precisely set thread regulator assures an optimal sewing result.
With a correct setting the needle thread loop must glide over the
thickest part of the hook with a light tension.
–
Loosen screw 5.
–
Set the position of the thread regulator.
–
Tighten screw 5.
Setting note:
When the largest thread quantity is required, the check spring 7 must
be pulled up approx. 0.5 mm from its upper end position. This is the
case when the needle thread loop passes the maximum hook
circumference.
5