Duerkopp Adler 743-121 Panduan Petunjuk Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin Jahit Duerkopp Adler 743-121. Duerkopp Adler 743-121 7 halaman.
Juga untuk Duerkopp Adler 743-121: Panduan Petunjuk Pengoperasian (14 halaman)
Halaman Cetak
1. Delivery Scope for the Sewing Unit
2. Installing the Sewing Unit
2.1 Transporting the Sewing Unit
–
Basic equipment, depending on execution with bundle clamp and
remover device.
–
Microcontrol.
–
Thread stand.
–
Small parts with the accessories.
CAUTION !
The sewing unit may only be installed by trained personnel.
Before installation the following transport securing devices are to be
removed:
–
The securing band from the sewing drive.
–
The angles which hold the frame feet to the wooden pallet.
–
The screw clamps on the transport carriage.
The sewing unit has 4 castors for moving it in-house.
CAUTION !
When the sewing unit is in operation the castors must be screwed in so
far that the unit stands firmly on its feet.
–
For transport turn the set screws 1 - 4 to the left.
The feet must have sufficient floor clearance for transport.
–
Move the sewing unit.
–
To lower the sewing unit turn the set screws 1 - 4 to the right.
The feet must stand firmly on the floor.
1
2
3
4
3