Duerkopp Adler 743-121 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Duerkopp Adler 743-121에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 743-121 7 페이지.
Duerkopp Adler 743-121에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)

페이지 인쇄

1. Delivery Scope for the Sewing Unit

2. Installing the Sewing Unit

2.1 Transporting the Sewing Unit

–

Basic equipment, depending on execution with bundle clamp and

remover device.

–

Microcontrol.

–

Thread stand.

–

Small parts with the accessories.

CAUTION !

The sewing unit may only be installed by trained personnel.

Before installation the following transport securing devices are to be

removed:

–

The securing band from the sewing drive.

–

The angles which hold the frame feet to the wooden pallet.

–

The screw clamps on the transport carriage.

The sewing unit has 4 castors for moving it in-house.

CAUTION !

When the sewing unit is in operation the castors must be screwed in so

far that the unit stands firmly on its feet.

–

For transport turn the set screws 1 - 4 to the left.

The feet must have sufficient floor clearance for transport.

–

Move the sewing unit.

–

To lower the sewing unit turn the set screws 1 - 4 to the right.

The feet must stand firmly on the floor.