Duerkopp Adler 743-121 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Duerkopp Adler 743-121에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 743-121 7 페이지.
Duerkopp Adler 743-121에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)

페이지 인쇄

2.2 Setting the Work Height

2.3 Fastening the Thread Stand

2.4 Checking the V-belt Tension

The work height is adjustable between 84.5 cm and 124.5 cm.

The sewing unit is set at its lowest height for shipping.

Setting the work height

–

Loosen the fastening screws 1 - 4.

–

Set the unit horizontally to the desired height.

–

Securely tighten the fastening screws 1 - 4.

The assembly and position of the thread stand can be seen in the

photo on the title page.

–

Insert the stands and tighten the nuts under the work plate.

–

The thread spool holders and take-off arms must lie above each

other.

It should be possible to press the V-belt together about 10 mm at its

center.

Setting the V-belt tension

–

Swing the drive until the desired V-belt tension is reached.