Duerkopp Adler 743-121 Manual de instrucciones de instalación - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Máquina de coser Duerkopp Adler 743-121. Duerkopp Adler 743-121 7 páginas.
También para Duerkopp Adler 743-121: Manual de instrucciones (14 páginas)
Imprimir página
2.2 Setting the Work Height
2.3 Fastening the Thread Stand
2.4 Checking the V-belt Tension
4
The work height is adjustable between 84.5 cm and 124.5 cm.
The sewing unit is set at its lowest height for shipping.
Setting the work height
–
Loosen the fastening screws 1 - 4.
–
Set the unit horizontally to the desired height.
–
Securely tighten the fastening screws 1 - 4.
The assembly and position of the thread stand can be seen in the
photo on the title page.
–
Insert the stands and tighten the nuts under the work plate.
–
The thread spool holders and take-off arms must lie above each
other.
It should be possible to press the V-belt together about 10 mm at its
center.
Setting the V-belt tension
–
Swing the drive until the desired V-belt tension is reached.
1
2
3
4