Duerkopp Adler 744-122 Panduan Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Jahit Duerkopp Adler 744-122. Duerkopp Adler 744-122 8 halaman.
Juga untuk Duerkopp Adler 744-122: Panduan Petunjuk Instalasi (9 halaman)
Halaman Cetak
2.2 Attaching the material stopper by
primary seams
Turn main switch off!
- Risk of Injury -
–
The contours of the material stopper and the
material guide rail must agree in the transport
carriage's right hand position.
–
Turn the star grip 7 back several turns.
–
Slide the holder plate 5 under the star grip 7 in
such a manner that its cutout is exactly seated
on the collar bolt and the hole locks above the
location peg 6.
2.3 Setting the seam interval by pri-
mary seams
The uniform gap between material guide rail and
material stopper, that is, the planned seam interval,
is to be set after loosening the screws 4.
6
–
Screw the star grip 7 tight.
–
When equipped with material holder 1 on the
material stopper its compressed air hose
should be plugged into the pneumatic socket 3.
–
The coding plug_2_is always to be plugged into
the socket 8_.
It contains the coding for the allowable rail
return speed.
1
3
2
8
4
7 6
5