Duerkopp Adler 744-122 사용 설명서 - 페이지 6

{카테고리_이름} Duerkopp Adler 744-122에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 744-122 8 페이지.
Duerkopp Adler 744-122에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (9 페이지)

페이지 인쇄

2.2 Attaching the material stopper by

primary seams

Turn main switch off!

- Risk of Injury -

–

The contours of the material stopper and the

material guide rail must agree in the transport

carriage's right hand position.

–

Turn the star grip 7 back several turns.

–

Slide the holder plate 5 under the star grip 7 in

such a manner that its cutout is exactly seated

on the collar bolt and the hole locks above the

location peg 6.

2.3 Setting the seam interval by pri-

mary seams

The uniform gap between material guide rail and

material stopper, that is, the planned seam interval,

is to be set after loosening the screws 4.

–

Screw the star grip 7 tight.

–

When equipped with material holder 1 on the

material stopper its compressed air hose

should be plugged into the pneumatic socket 3.

–

The coding plug_2_is always to be plugged into

the socket 8_.

It contains the coding for the allowable rail

return speed.

7 6