Duevi DIRRV2 868 Panduan Instalasi dan Penggunaan

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Penggunaan untuk Sensor Keamanan Duevi DIRRV2 868. Duevi DIRRV2 868 4 halaman. Infrared wireless detector

Halaman Cetak

DIRRV2 868

INFRARED WIRELESS DETECTOR

[868] [TWO-WAY]

DO NOT USE OUTDOOR: THE DEVICE IS NOT PROTECTED AGAINST WEATHERING

REPLACE THE BATTERY ONLY WITH THE SAME MODEL. DO NOT DISPOSE THE BATTERY AS UNSORTED MUNICIPAL WASTE, USE THE

RELEVANT BOXES.

1. RECOMMENDATIONS

MOUNT AT ABOUT 240 CM HEIGHT, ON STABLE SURFACE, NON-METALLIC, FAR FROM HEATING SYSTEMS OR AIR FLOWS. DO NOT

MOUNT THE DETECTOR NEAR TO TRANSMITTERS, HEATING DUCTS AND/OR CONDITIONERS OR FACING TO WINDOWS EXPOSED TO

DIRECT SUN LIGHT.

BOTH JOINT (OPTIONAL) AND DETECTOR HAVE A DIRECTION OF ORIENTATION, WHICH MUST BE RESPECTED. AN ARROW ON THE REAR

SIDE OF JOINT AND DETECTOR INDICATES THIS DIRECTION. PLACE THEM IN WITH THE SAME ORIENTATION, WITH THE ARROW

POINTING UPWARD.

Anti-removal

tamper switch

2. INSTALLATION WITH JOINT (OPTIONAL)

1. Once defined the installation position, fix the joint (optional) on wall, verify the integrated tamper switch is closed, then fix it with the dowels

provided:

Screws for dowels

FASTEN THE INTERNAL JOINT LOCK SCREW AFTER TEST OF DETECTOR ORIENTATION

INSTALLATION AND USE MANUAL

Installation direction: arrow must

be pointing upward

Joint (rear side, optional)

Screw for joint lock

Detector (rear side)

Joint (optional)

17.05-M:8.2-H:*.*

Dowels

Wall