Duevi DIRRV2 868 Installatie- en gebruikshandleiding
Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Duevi DIRRV2 868. Duevi DIRRV2 868 4 pagina's. Infrared wireless detector
Pagina afdrukkenDIRRV2 868
INFRARED WIRELESS DETECTOR
[868] [TWO-WAY]
DO NOT USE OUTDOOR: THE DEVICE IS NOT PROTECTED AGAINST WEATHERING
REPLACE THE BATTERY ONLY WITH THE SAME MODEL. DO NOT DISPOSE THE BATTERY AS UNSORTED MUNICIPAL WASTE, USE THE
RELEVANT BOXES.
1. RECOMMENDATIONS
MOUNT AT ABOUT 240 CM HEIGHT, ON STABLE SURFACE, NON-METALLIC, FAR FROM HEATING SYSTEMS OR AIR FLOWS. DO NOT
MOUNT THE DETECTOR NEAR TO TRANSMITTERS, HEATING DUCTS AND/OR CONDITIONERS OR FACING TO WINDOWS EXPOSED TO
DIRECT SUN LIGHT.
BOTH JOINT (OPTIONAL) AND DETECTOR HAVE A DIRECTION OF ORIENTATION, WHICH MUST BE RESPECTED. AN ARROW ON THE REAR
SIDE OF JOINT AND DETECTOR INDICATES THIS DIRECTION. PLACE THEM IN WITH THE SAME ORIENTATION, WITH THE ARROW
POINTING UPWARD.
Anti-removal
tamper switch
2. INSTALLATION WITH JOINT (OPTIONAL)
1. Once defined the installation position, fix the joint (optional) on wall, verify the integrated tamper switch is closed, then fix it with the dowels
provided:
Screws for dowels
FASTEN THE INTERNAL JOINT LOCK SCREW AFTER TEST OF DETECTOR ORIENTATION
INSTALLATION AND USE MANUAL
Installation direction: arrow must
be pointing upward
Joint (rear side, optional)
Screw for joint lock
Detector (rear side)
Joint (optional)
17.05-M:8.2-H:*.*
Dowels
Wall