Danfoss iC7 Series Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penggerak DC Danfoss iC7 Series. Danfoss iC7 Series 6 halaman. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Juga untuk Danfoss iC7 Series: Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (14 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (18 halaman)

Halaman Cetak
Danfoss iC7 Series Panduan Instalasi
Multiwire Kit for Fx09-Fx10
Installation Guide
c.
Align the hole in the lug with the hole in the terminal busbar.
d.
-
Check that the lug is in contact with the busbar.
-
e.
Tighten the cable gland.
1
Illustration 1: Installation of 1
nd
3.
Install the 2
cable:
-
a.
Attach the lug to the cable.
b.
-
Position the lug on top of the terminal busbar.
See
Illustration
c.
-
Align the hole in the lug with the hole in the terminal busbar.
-
Danfoss A/S © 2022.10
st
Cable
2.
2
AN428032702374en-000101 / 136R0316 | 3
Installation