Casio 2411 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Menonton Casio 2411. Casio 2411 9 halaman.

Halaman Cetak

To turn holiday highlighting on and off

1. Display the Calendar screen and scroll to the month that contains the date

you want to highlight or unhighlight.

2. Hold down A for about one second, until the first day of the displayed

month starts to flash, which indicates the setting screen.

• The first day of the month flashes because it is selected .

3. Use E (+) and B (–) to move the flashing around the calendar to the

date whose highlighting you want to turn on or off.

• Holding down either button moves the flashing at high speed.

4. When the date you want is flashing, press F to toggle its highlighting on

and off.

5. After all date highlighting for the month is the way you want, press A to

save your settings and exit the setting screen.

• The message WAIT SET appears on the display for a few moments as

the watch saves your settings.

Note

You can also make watch holiday settings on your computer using the link

software that comes bundled with the watch. See the WQV Link 2.0 user's

manual on the CD-ROM that comes with the watch for more information.

ALARM

You can set up to five independent Daily

Alarm No.

Alarms, and assign images in watch memory

to each alarm so the image flashes on the

display while the alarm is sounding.

When the Hourly Time Signal is turned on, the

ALM1

watch beeps every hour on the hour.

1 2 : ‰ ‰

• "CASIO" flashes on the screen if you do not

have any alarm screen image specified or if

OFF

the image you specified has been deleted.

• Alarm settings (and Hourly Time Signal

settings) are available in the Alarm Mode,

Alarm time

which you can enter by pressing D.

(Hour : Minutes)

To set the alarm time and alarm screen image

1. In the Alarm Mode, use B and E to

select the alarm (1 to 5) whose time you

ALM2

want to set.

1 2 : ‰ ‰

The on/off status of each

alarm is indicated here.

Alarm on indicator

Press E.

Alarm 1

(ALM1)

Hourly Time Signal

(SIG)

2. After you select an alarm, hold down A until the hour digits of the alarm

time start to flash, which indicates the setting screen.

• This automatically turns on the alarm and displays the alarm on

indicator.

3. Use C or D to move the flashing in the sequence shown below to select

other settings.

Press

Hour

4. Use E (+) and B (–) to change the flashing setting.

• While the alarm screen image is flashing on the display, press E or B

to scroll through images in watch memory. Display the one you want to

use as your alarm screen image.

• Holding down either button changes the setting at high speed.

• When setting the alarm time using the 12-hour format, take care to set

the time correctly as am (A indicator) or pm (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

When an alarm is turned on, the alarm tone sounds for 20 seconds at the

preset time each day with an alarm screen image flashing on the display.

Press any button to stop the alarm after it starts to sound.

To test the alarm

In the Alarm Mode, hold down C to sound the alarm.

Press B.

Alarm 2

Alarm 3

(ALM2)

(ALM3)

Alarm 5

Alarm 4

(ALM5)

(ALM4)

Press

Alarm Screen

Minutes

Image

To turn a Daily Alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use B and E to select an alarm or the Hourly Time

Signal you want to turn on or off.

2. Press C to turn it on and off.

• The alarm on indicator (

) and the Hourly Time Signal on indicator

(

) are shown on the display in the Timekeeping, Alarm, Countdown

Timer, and Stopwatch Modes.

• If any alarm is on, the alarm on indicator is shown on the display.

COUNTDOWN TIMER

You can set the Countdown Timer within a

Mode indicator

range of 1 to 60 minutes.

You can assign an image in watch memory as

the countdown timer screen image, which

TMR

flashes on the display while the countdown

timer alarm is sounding.

6 ‰

‰ ‰

• "CASIO" flashes on the screen if you do not

have any countdown timer screen image

specified or if the image you specified has

been deleted.

Minutes

Seconds

• All of the operations in this section can be

performed in the Countdown Timer Mode,

which you can enter by pressing D.

To set the countdown start time and countdown timer screen

image

1. In the Countdown Timer Mode, hold down

A until the minutes setting of the

TMR

countdown timer starts to flash, which

‰ ‰

indicates the setting screen.

2. Press C or D to toggle between the

minutes setting screen and countdown

timer screen image setting screen.

3. Use E (+) and B (–) to change the

flashing setting.

• While the countdown timer screen image

• Holding down either button changes the

4. Press A to exit the setting screen.

Countdown Timer Operation

A countdown timer screen image flashes on the display and an alarm sounds

for 10 seconds when the countdown reaches zero.

Press any button to stop the alarm after it starts to sound.

• The countdown time is automatically reset to its start time after the alarm

stops.

To use the Countdown Timer

Press E while in the Countdown Timer Mode

to start the countdown timer.

TMR

• The time is counted down on the display in

5 9

one-second increments.

• Pressing E while a countdown operation is

in progress pauses the countdown. Press

E again to resume the operation.

• Pressing B while a countdown is stopped

Seconds

resets the countdown to the countdown start

Minutes

time.

2411-6

is flashing on the display, press E or B

to scroll through images in watch

memory. Display the one you want to

use as your countdown timer screen

image.

setting at high speed.