Danfoss ECL Comfort 310 Panduan Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Unit Kontrol Danfoss ECL Comfort 310. Danfoss ECL Comfort 310 10 halaman. A302
Juga untuk Danfoss ECL Comfort 310: Panduan Instalasi (8 halaman), Manual Pemasangan (4 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Servis (16 halaman), Panduan Pengoperasian (8 halaman), Panduan Pengoperasian (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (7 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (12 halaman), Manual Pemasangan (20 halaman), Manual Pemasangan (20 halaman), Manual Pemasangan (12 halaman), Manual Pemasangan (16 halaman), Panduan Pengoperasian (8 halaman)

ECL Comfort 210, 296 and 310, return temperature limitation

1.1 Important safety and product information

1.1.1 Important safety and product information

This Installation Guide is an appendix to installation guides

associated with ECL application keys produced as from September

2013 and contains only a description of the return temperature

limitation functionality in a master / slave system.

The return temperature limitation functionality can be realized

with ECL Comfort 210, ECL Comfort 296 and ECL Comfort 310.

For information on general functions please consult the installation

guide for the application key in question.

Additional documentation for ECL Comfort 210, 296 and 310,

modules and accessories is available on http://heating.danfoss.com/.

2 | © Danfoss | 2017.08

Safety Note

To avoid injury of persons and damages to the device, it is absolutely

necessary to read and observe these instructions carefully.

Necessary assembly, start-up, and maintenance work must be

performed by qualified and authorized personnel only.

Local legislations must be respected. This comprises also cable

dimensions and type of isolation (double isolated at 230 V).

A fuse for the ECL Comfort installation is max. 10 A typically.

The ambient temperature ranges for ECL Comfort in operation are:

ECL Comfort 210 / 310: 0 - 55 °C

ECL Comfort 296: 0 - 45 °C.

Exceeding the temperature range can result in malfunctions.

Installation must be avoided if there is a risk for condensation (dew).

The warning sign is used to emphasize special conditions that should

be taken into consideration.

This symbol indicates that this particular piece of information should

be read with special attention.

VI.GU.W2.02