Danfoss VLT AQUA Drive FC 202 Panduan Petunjuk Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Unit Kontrol Danfoss VLT AQUA Drive FC 202. Danfoss VLT AQUA Drive FC 202 6 halaman. Igbt module replacement for d1h–d8h drives
Juga untuk Danfoss VLT AQUA Drive FC 202: Panduan Pengoperasian (16 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Petunjuk Instalasi (8 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Instalasi (6 halaman), Panduan Petunjuk Pengoperasian (16 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (6 halaman)

Halaman Cetak
Danfoss VLT AQUA Drive FC 202 Panduan Petunjuk Instalasi
Installation Instructions
3.
Remove all control cables from the metal bracket
(spring-loaded).
4.
Remove any A, B, or C options that may be installed.
5.
Remove the I/O terminals.
1
Location of A option
2
Location B option
3
I/O terminals
Illustration 1.5 Location of Options and I/O Terminals
MI93A102
®
Control Card VLT
FC Series
6.
7.
1
2
3
Illustration 1.6 Location of Cable Shield, Screws, and MCO Ribbon
Cable
Danfoss A/S © 03/2017 All rights reserved.
Unscrew the 3 T10 screws and remove the cable
shield.
Remove the plastic cover underneath the cable
shield.
Cable shield
MCO ribbon cable
T10 screws
5