Danfoss PAH 80 Panduan Servis - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Servis untuk Pompa Air Danfoss PAH 80. Danfoss PAH 80 16 halaman. Pah series tap water pump disassembling and assembling
Juga untuk Danfoss PAH 80: Petunjuk Manual (12 halaman)
Halaman Cetak
Service guide | Disassembling and assembling PAH 50-100
10
5. Mount the housing using the pin as guide.
7. Mount the thrust plate with sealings on
the cylinder barrel.
9. Mount the cylinder barrel in the housing.
180R9098 | 521B1072 | DKCFN.PI.011.NC5.02 | 06.2017
6. Place housing and port flange near table
edge and mount screws from below.
8. Press the thrust plate into the cylinder
barrel using a table or the like as support.
10. Slide the retaining ball (smallest diameter
pointing upwards) down the shaft.