Danfoss PAH 80 Instrukcja serwisowa - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Pompa wodna Danfoss PAH 80. Danfoss PAH 80 16 stron. Pah series tap water pump disassembling and assembling
Również dla Danfoss PAH 80: Instrukcja obsługi (12 strony)
Drukuj stronę
Service guide | Disassembling and assembling PAH 50-100
10
5. Mount the housing using the pin as guide.
7. Mount the thrust plate with sealings on
the cylinder barrel.
9. Mount the cylinder barrel in the housing.
180R9098 | 521B1072 | DKCFN.PI.011.NC5.02 | 06.2017
6. Place housing and port flange near table
edge and mount screws from below.
8. Press the thrust plate into the cylinder
barrel using a table or the like as support.
10. Slide the retaining ball (smallest diameter
pointing upwards) down the shaft.