Danfoss VLT 5000 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Danfoss VLT 5000. Danfoss VLT 5000 7 halaman. Frequency converter
Juga untuk Danfoss VLT 5000: Catatan Aplikasi (16 halaman)

Halaman Cetak

PCP communication

Via the CMD tool you are able to read and write to

parameters and read the English parameter text of

each parameter.

To start PCP communication you must be in Monitor

state. Click on the station number and click on the

right mouse button and choose Device

Parametization.

The dialog box will now show Danfoss, VLT 5000,

Profile: 21. In order to be able to read in all

parameters in the VLT frequency converter select

Device and Read Parameter List. The CMD tool will

now start reading all parameters, this will take 3-4

minutes.

When all parameters have been read, CMD will

show the first parameter 55F1 Hex Language at the

first row.

55F1 Hex corresponds to 22001

all VLT 5000 parameters simply can be accessed by

adding 22000

to the VLT 5000 parameter. For

example if you want to write to parameter 207

Ramp up time 1 you must write to 22207

Hex).

The CMD tool can only indicate parameters by

hexadecimal numbers.

MN.50.U1.02 - VLT is a registered Danfoss trademark

VLT

If you want to change the value of parameter 207

Ramp up time 1 to 10 sec you must write 1000 in

column next to index 56BF Hex. You have to

enter 1000 because VLT parameter 207 has a

conversion index of -2 = 10

Highlight the row by clicking on 60 and click on F5

Write Value. The ramp up time in parameter 207

has now been changed to 10 sec.

At the bottom of the parameter list the Interbus

Drivecom 21 objects are available. These objects

are not accessible via the LCP but only via Interbus

PCP communication.

Please have a look at the Interbus operating

instructions for further description of these objects.

. This means that

(56BF

5000 and Interbus CMD

-2