Danfoss VLT AutomationDrive FC 301 Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Konverter Media Danfoss VLT AutomationDrive FC 301. Danfoss VLT AutomationDrive FC 301 8 halaman. 24 v dc supply
Juga untuk Danfoss VLT AutomationDrive FC 301: Panduan Instalasi (20 halaman), Panduan Petunjuk Instalasi (6 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Petunjuk Instalasi (6 halaman)

Installation Instructions

Relay connection

Fuses

Motor connection

Input/mains connection

Illustration 1.2 A5 Enclosure (Single-phase and 3-phase)

Internal Mains Fuse Replacement for VLT

FC 102/FC 103/FC 202/FC 301/FC 302

Enclosure size B

Illustration 1.3, Illustration 1.4, and Illustration 1.5 show the

mains, motor, and relay connection locations for B1 and B2

enclosures.

Motor and relay connections are located under the fuse block

plate. To access these connectors, remove the 3 T20 screws

that are securing the fuse block plate to the drive and lift off

the plate. Do not disassemble the fuse block plate.

Illustration 1.3 B1 Enclosure (Single-phase and 3-phase)

Drives, 0.25–90 kW (0.3–125 hp)

Input/mains connection

Fuse block plate

Motor connection (beneath the fuse block plate)

Relay connection (beneath the fuse block plate)

MI92D402