Free The Tone ARC-4 Prosedur Pembaruan Firmware - Halaman 11
Jelajahi secara online atau unduh pdf Prosedur Pembaruan Firmware untuk Peralatan Perekaman Free The Tone ARC-4. Free The Tone ARC-4 18 halaman. Audio routing controller
Juga untuk Free The Tone ARC-4: Panduan Pemilik (16 halaman)
Halaman Cetak
4)
On the ARC-4 in Edit mode, select "DUMP LOAD" and set it to be ready for data reception.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.23).
5)
Click the "Play" button at the upper left corner of the SysEx Librarian's main screen.
6)
The Display-1 on the ARC-4 counts up from "1" to "300" and shows "WAIT," then "DONE." If the unit returns to Edit mode, the
writing process is completed.
NOTE: "WAIT" may be indicated for more than 20 seconds. Please do not turn off the power and be sure to wait until "DONE" is
shown.
7)
Press the MODE switch to return the unit to its normal operation mode. This completes the firmware update steps.
11