Free The Tone ARC-4 펌웨어 업데이트 절차 - 페이지 11
{카테고리_이름} Free The Tone ARC-4에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Free The Tone ARC-4 18 페이지. Audio routing controller
Free The Tone ARC-4에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)
페이지 인쇄
4)
On the ARC-4 in Edit mode, select "DUMP LOAD" and set it to be ready for data reception.
For details, please refer to "Receiving ARC-4's Data (DP-LD)" in ARC-4 Owner's Manual (p.23).
5)
Click the "Play" button at the upper left corner of the SysEx Librarian's main screen.
6)
The Display-1 on the ARC-4 counts up from "1" to "300" and shows "WAIT," then "DONE." If the unit returns to Edit mode, the
writing process is completed.
NOTE: "WAIT" may be indicated for more than 20 seconds. Please do not turn off the power and be sure to wait until "DONE" is
shown.
7)
Press the MODE switch to return the unit to its normal operation mode. This completes the firmware update steps.
11