AudioCodes Mediant 500L MSBR Panduan Pengaturan Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Gerbang AudioCodes Mediant 500L MSBR. AudioCodes Mediant 500L MSBR 8 halaman. Multi-service business router
Juga untuk AudioCodes Mediant 500L MSBR: Panduan Pengaturan Cepat (6 halaman)
Halaman Cetak
Physical Description
3
4 5
1
2
[The number and type of port interfaces depend on the ordered hardware configuration.]
1
POWER
AC power plug entry
Power LED (located on the front panel):
Status LED (located on the front panel):
2
ON / OFF
Power button to switch on the device (when pressed in) and to switch off the
device (when pressed out).
3
CONSOLE
RS-232 serial interface port (RJ-45).
4
USB port, which you can use for various functionalities such as storing the
configuration file on an external USB hard drive.
5
//
Reset pinhole button for resetting the device or restoring it to factory defaults. To
restore the device to factory defaults: with a paper clip or any other similar
pointed object, press and hold down the button for at least 12 seconds (but no
more than 25 seconds).
6
S1 GE LAN
Up to four Gigabit Ethernet (10/100/1000Base-T) ports (RJ-45) for connecting IP
phones, computers, or switches. The ports support 1+1 Ethernet port redundancy
(active-standby), half- and full-duplex modes, auto-negotiation, and straight-
through or crossover cable detection.
Green On
Power received by device
Off
No power
Green On
Device is operational
Green Flashing
Initial rebooting stage or software upgrade (.cmp
file) in process
Red On
Boot failure
Off
Advanced rebooting stage
Green On
Ethernet link established
Green Flashing
Data is being received or transmitted
Off
No Ethernet link
2 |
6
P a g e