Duplo DBM-120 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin Lipat Duplo DBM-120. Duplo DBM-120 13 halaman. Connecting kit model: dc-6000s;dc-8000s 2; dc-10000s
Juga untuk Duplo DBM-120: Panduan Instalasi (12 halaman)

Halaman Cetak

Turn on the power supply of the DBM-120, and set to the A3 size.

Refer to "6-1. Basic Operation" in the instruction manual of the DBM-120 for details on

setting the paper size.

Adjust at the long holes of the connecting plate so that the A3 mark on the indication label of

the DBM-120 faces the LU-HM exit jam sensor side facing up, and tighten the screws

temporarily secured in step 2 to secure the connecting plate and LU-HM.

LU-HM exit

jam sensor

2-7. Connecting the Communication Cable

Connect the communication cable

provided to the connector of the DBM-120.

After connecting, be sure to tighten the

screws.

<< Parts to be used >>

Communication cable q .................................... 1

Connect the other connector of the

communication cable to the connector (at

the bottom) for connecting the peripheral

devices of the suction collator.

After connecting, be sure to tighten the

screws.

Adjust the A3 mark on the

indication label to this face

2. INSTALLING PROCEDURE

Communication cable

Screws

Indication label of DBM-120

Screws

DBM-120

Suction collator