Duplo DBM-120 설치 매뉴얼 - 페이지 12
{카테고리_이름} Duplo DBM-120에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duplo DBM-120 13 페이지. Connecting kit
model: dc-6000s;dc-8000s 2;
dc-10000s
Duplo DBM-120에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)
페이지 인쇄
6
Turn on the power supply of the DBM-120, and set to the A3 size.
Refer to "6-1. Basic Operation" in the instruction manual of the DBM-120 for details on
setting the paper size.
7
Adjust at the long holes of the connecting plate so that the A3 mark on the indication label of
the DBM-120 faces the LU-HM exit jam sensor side facing up, and tighten the screws
temporarily secured in step 2 to secure the connecting plate and LU-HM.
LU-HM exit
jam sensor
2-7. Connecting the Communication Cable
1
Connect the communication cable
provided to the connector of the DBM-120.
After connecting, be sure to tighten the
screws.
<< Parts to be used >>
Communication cable q .................................... 1
2
Connect the other connector of the
communication cable to the connector (at
the bottom) for connecting the peripheral
devices of the suction collator.
After connecting, be sure to tighten the
screws.
Adjust the A3 mark on the
indication label to this face
2. INSTALLING PROCEDURE
Communication cable
Communication cable
Screws
Indication label of DBM-120
Screws
DBM-120
Suction collator
9