Conrad-Johnson MET1 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Conrad-Johnson MET1. Conrad-Johnson MET1 14 halaman. Multi-channel enhanced-triode preamplifier

Halaman Cetak

Care in installation can often avoid EMI induced problems. The

following

practices

should

generally

observed in any

application, and will be especially important where EMI may be a

problem.

Interconnect cables should be kept as short as possible (3 meters

or less), and shielded cable should be used (cable which has two

center conductors, and a separate external shield connected at

only one end).

Physical location and cable "dress" can be an important factor in

minimizing hum pickup. The installation should situate the

preamplifier well away from the power amplifier, and power (ac

mains) cords should be dressed to remain at least 4" (100mm)

away from input/output cables.

MET1 Owner's Manual