Dantherm HCP 10 Instalasi dan Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Kontrol Jarak Jauh Dantherm HCP 10. Dantherm HCP 10 8 halaman.

Remote Control HCP 10 – Installation and User Manual,

Parts

This shows the parts that are included with the HCP 10 (wallbox is not included):

Procedure

Follow these steps to mount the Remote Control:

Step

Mount the wallbox in the wall, if not already done.

The HCP 10 fits to a GIRA EAN 4010337061038 or single LK Fuga EAN

5703302105002 (green) wallbox/Unterputzdose.

Mount the metal frame on the wallbox using the 2 screws.

Put the cable from the wall through the plastic frame and click it into the

socket on the Control panel.

Switch the power on and check if the display on the HCP 10 lights up, and

Click the Control panel on the metal frame.

RJ cable

Plastic frame

Control panel

Action

continued

Wall box

Metal frame