Dantherm HCP 10 설치 및 사용자 설명서 - 페이지 3
{카테고리_이름} Dantherm HCP 10에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dantherm HCP 10 8 페이지.
페이지 인쇄
Remote Control HCP 10 – Installation and User Manual,
Parts
This shows the parts that are included with the HCP 10 (wallbox is not included):
Procedure
Follow these steps to mount the Remote Control:
Step
1
Mount the wallbox in the wall, if not already done.
The HCP 10 fits to a GIRA EAN 4010337061038 or single LK Fuga EAN
5703302105002 (green) wallbox/Unterputzdose.
2
Mount the metal frame on the wallbox using the 2 screws.
3
Put the cable from the wall through the plastic frame and click it into the
socket on the Control panel.
4
Switch the power on and check if the display on the HCP 10 lights up, and
Click the Control panel on the metal frame.
RJ cable
Plastic frame
Control panel
Action
continued
Wall box
Metal frame
3