AudioSource EQ 200 Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Ekualiser Stereo AudioSource EQ 200. AudioSource EQ 200 12 halaman. Ten-band stereo graphic equalizer with spectrum analyzer display
Juga untuk AudioSource EQ 200: Panduan Pemilik (4 halaman), Panduan Pemilik (7 halaman), Panduan Pemilik (5 halaman)
Halaman Cetak
WARNING: To
reduce the risk of fire or electric
shock, do not expose this appliance
to rain or moisture.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffb
cient magnatude to constitute a risk of electrical
shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap-
I
pliance.
1 CAUTION:
"TO PREVENT
ELECTRIC
SHOCK,
CAUTION:
To reduce the risk of electric shock, do
not remove cover (or back); no user
servicable parts inside. Refer servicing
to qualified service personnel.
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT." - "ATTENTION:
POUR EVITERLES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE
DE LA
FICHE
DANS
LA
BORNE
CORRESPONDANTE DE LA PRISE ET
I
POUSSER JUSQU'AU FOND."
-#h.
-
. .
Safety instructions
Read Instructions
- All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions
- The safety and operating instructions
should be adhered to.
Heed Warnings
- All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions
-All operating and use instructions should
be followed.
Water and
Moisture
- The appliance should not be used near
water. For example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
Ventilation
- The appliance should be situated so that its
locationorpositiondoesnot interferewithitsproperventilation.
For example, theappliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings;
or, placed in a built-in situation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation
openings.
Heat
- Theappliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
Power Sources
- Theappliance should be connected to a power
supply only of the type described in the operating instructions
or as marked on the appliance.
Grounding or Polarization
- Precautions should be taken so
that the grounding or polarization means of an appliance is not
defeated.
Power-Cord Protection
- Power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed on or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Cleaning
- The appliance should be cleaned only as
recommended by the manufacturer.
Power
Liies - An outdoor antenna should be located
away from power lines.
Non-use Periods
- The power cord of the appliance
should be unplugged from the outlet when left unused for
a long period of time.
Object and Liquid Entry
- Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
Damage Requiring Service
- The appliance should be
serviced by qualified service personnel when:
A) The power supply cord or the plug has been
damaged; or
B) Objects have f#len, or liquid has been spilled
into the appliance; or
C) The appliance has been exposed to rain; or
D) The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E) The appliance has been dropped, or the
enclosure damaged.
Servicing
- The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Product Servicing
- In the event your EQ 200 fails to
operate properly, please contact AudioSource directly for
further assistance, repair, service, or replacement.Please
see back cover for address and telephone number.