Contacta HLD9 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Bantu Dengar Contacta HLD9. Contacta HLD9 20 halaman. Hearing loop driver

Halaman Cetak
High Frequency Compensation (PAGE 2)
PAGE 2 settings are for the high frequency compensation which
is required to compensate for loss of high frequencies due to the
presence of metal within the proximity of the loop.
MIC
CLIP
ACTIVE
PHTM
PAGE 2 is identified by
LED 2 flashing
Microphone Phantom Power Selection (PAGE 3)
PAGE 3 settings are for the microphone phantom power selection.
MIC
CLIP
ACTIVE
PHTM
PAGE 3 is identified by
LED 3 flashing
12
LINE
Adjustments can be made by
pressing the LINE + or - buttons.
There are 6dB of HF compensation
adjustment possible
LINE
Pressing the LINE + button turns
the phantom power on, pressing
This LED indicates
the LINE- button turns phantom
that phantom
power off
power is on
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
LOW SIG
SECONDARY
2.5
5
7.5
DRIVE
STATUS
POWER
When you are ready to move
onto the next PAGE press the
DRIVE + button
2.5
5
7.5
DRIVE
STATUS
POWER
When you are ready to move
onto the next PAGE press the
DRIVE + button
10
10