DAPAudio DS-CDJ-250 MKII Panduan Produk - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Produk untuk Mixer Musik DAPAudio DS-CDJ-250 MKII. DAPAudio DS-CDJ-250 MKII 20 halaman. Audio mixer
Juga untuk DAPAudio DS-CDJ-250 MKII: Panduan Pengguna (19 halaman)

Halaman Cetak

18. Crossfader Replacement

1. Unscrew the fader(B) screws. Do not touch the innerscrews(C). Carefully remove the old crossfader

and unplug the cable.(D)

2. Plug in the new Crossfader into the cable (D)and place the new Crossfader back in the mixer.

3. Screw the Crossfader into the mixer using the fader plate screws.

4. Replace the fader knob.

Before switching off the power

When you have finished using the CD player, before switching off the power, be sure that the Disc holder

has been closed with the Eject button.

CAUTION:

• Do not forcibly close the disc holder when the power is off.

• Do not switch off the power, when the disc holder is open.

• Switch off the power after the disc holder has been closed with the Eject button.

CD's

Precautions on handling compact discs

• Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a

soft dry cloth.

• Do not use thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths

to clean discs.

• Always handle discs carefully to prevent damaging the surface; in particular when removing a disc

from its case or returning it.

• Do not bend the disc.

• Do not put the CD near heating sources.

• Do not enlarge the hole in the center of the disc.

• Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.

• Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in

winter. Do not attempt to dry the disc with a hair dryer, etc.

Fig. 8