DAPAudio DS-CDJ-250 MKII Manuale del prodotto - Pagina 17
Sfoglia online o scarica il pdf Manuale del prodotto per Mixer musicale DAPAudio DS-CDJ-250 MKII. DAPAudio DS-CDJ-250 MKII 20. Audio mixer
Anche per DAPAudio DS-CDJ-250 MKII: Manuale d'uso (19 pagine)
Stampa la pagina
18. Crossfader Replacement
1. Unscrew the fader(B) screws. Do not touch the innerscrews(C). Carefully remove the old crossfader
and unplug the cable.(D)
2. Plug in the new Crossfader into the cable (D)and place the new Crossfader back in the mixer.
3. Screw the Crossfader into the mixer using the fader plate screws.
4. Replace the fader knob.
Before switching off the power
When you have finished using the CD player, before switching off the power, be sure that the Disc holder
has been closed with the Eject button.
CAUTION:
• Do not forcibly close the disc holder when the power is off.
• Do not switch off the power, when the disc holder is open.
• Switch off the power after the disc holder has been closed with the Eject button.
CD's
Precautions on handling compact discs
• Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a
soft dry cloth.
• Do not use thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths
to clean discs.
• Always handle discs carefully to prevent damaging the surface; in particular when removing a disc
from its case or returning it.
• Do not bend the disc.
• Do not put the CD near heating sources.
• Do not enlarge the hole in the center of the disc.
• Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.
• Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in
winter. Do not attempt to dry the disc with a hair dryer, etc.
15
Fig. 8