Duratool D03305 Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Multimeter Duratool D03305. Duratool D03305 8 halaman.

•

If several cables are not connected, their respective LEDs will not light.

•

If less than two cables are connected, none of the LEDs will light.

•

If two ends of a cable is crossed over, for example No.2 and No.4, then

displays on:

Main Tester:

Remote Tester:

•

The tester can be used to test installed network cabling between wall sockets

by using a matched pair of RJ45 or 110P4 cables between wall sockets and

tester.

BATTERY REPLACEMENT

•

If "

" appears in display, it indicates that the battery should be replaced.

•

To replace battery remove the meter from the protective surround, then

remove the 2 screws in the rear of the case

•

Remove the rear case half and simply remove the old battery, and replace with

a new one. (9-volt battery, NEDA 1604 6F22 type)

•

Be careful to observe correct polarity.

•

Fuses rarely need replacement and blow almost always as a result of operator

error. (F500mA/500V for mA terminal and F5A/500V for 5A terminal).

1-2-3-4-5-6-7-8-G

1-4-3-2-5-6-7-8-G