Addonics Technologies ADIDECF-N Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Addonics Technologies ADIDECF-N. Addonics Technologies ADIDECF-N 2 halaman. Ide cf
Halaman Cetak
Addonics IDE/CF Converter Board is a converter solution for the IDE port to have
CF card interface. It has a standard 40 pin or 44-pin IDE port, which can interface
to IDE host side and 50-pin Compact Flash socket in device side.
This is a convenient interface that allows Compact Flash modules to be used in
any system that has a standard IDE 40 pin or 44-pin connector.
Features
•
40 pin or 44 pin IDE standard Port
•
Simple plug and play, no drivers required
•
OS independent
•
Support Compact Flash TM cards (Type I & II) or IBM Microdrive TM
•
Transparent to the operating system and does not require any drivers
•
The CF card can be the primary booting device containing the OS and
application
•
Mount in PCI slot or 3.5" drive bay.
Software Installation:
Step 1
Connect Y-type power cable to this Bridge board and PC Power Supply (Ignore this
step when you use 44pin IDE connection which already have power input)
Step 2
Set jumper on IDE Master mode or Slave mode (J1 ON = Master, J1 OFF = Slave)
Step 3
Connect IDE connector to IDE host port or IDE flat cable
Important: IDE interface cannot support hot swap. When you insert or remove the
CF card, power off your system.
CONTACT US
www.addonics.com
Phone:
408-573-8580
Fax:
408-573-8588
Email:
http://www.addonics.com/sales/query/