- ページ 2

アダプター Addonics Technologies ADIDECF-NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies ADIDECF-N 2 ページ。 Ide cf

Addonics IDE/CF Converter Board is a converter solution for the IDE port to have

CF card interface. It has a standard 40 pin or 44-pin IDE port, which can interface

to IDE host side and 50-pin Compact Flash socket in device side.

This is a convenient interface that allows Compact Flash modules to be used in

any system that has a standard IDE 40 pin or 44-pin connector.

Features

•

40 pin or 44 pin IDE standard Port

•

Simple plug and play, no drivers required

•

OS independent

•

Support Compact Flash TM cards (Type I & II) or IBM Microdrive TM

•

Transparent to the operating system and does not require any drivers

•

The CF card can be the primary booting device containing the OS and

application

•

Mount in PCI slot or 3.5" drive bay.

Software Installation:

Step 1

Connect Y-type power cable to this Bridge board and PC Power Supply (Ignore this

step when you use 44pin IDE connection which already have power input)

Step 2

Set jumper on IDE Master mode or Slave mode (J1 ON = Master, J1 OFF = Slave)

Step 3

Connect IDE connector to IDE host port or IDE flat cable

Important: IDE interface cannot support hot swap. When you insert or remove the

CF card, power off your system.

www.addonics.com

Phone:

408-573-8580

Fax:

408-573-8588

Email:

http://www.addonics.com/sales/query/