Duratuf KL1 Manual Petunjuk Perakitan - Halaman 13

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Luar Ruangan Duratuf KL1. Duratuf KL1 16 halaman. Kiwi series

Step 1: Place shed in final position. Check the di-

agonal measurements are the same and

the shed is level before fitting Floor. It is

recommended that the shed is anchored

down with either a Duratuf Bolt Down Kit or

Duratuf Peg Down Kit depending on what

the shed is sited on.

Step 2: Lay a Floor Board on top of Bottom Plates

and Joist and push up against end wall.

Mark out where Studs are. Cut checkouts

with Electric Jigsaw so Floor Board will fit

around Studs.

Step 3: Re-position Floor Board. Lay out remain-

ing Floor Boards checking around Studs

as you go. The last Floor Board may

have to be cut to size.

Step 4: Nail in each Floor Board, two 50mm

nails in each end and two into Joist.

Measure and cut Floor Flashing (110) to

fit in between Door Jamb Flashings and

nail in place using 50mm Clouts.

KL3 FLOOR (Optional)