Aplex TB-587 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem I/O Aplex TB-587. Aplex TB-587 10 halaman. Machine vision lighting & i/o control board
Halaman Cetak6. External Trigger/Lighting Source Output Control Interface (LIGHTING_OUT, External):
(Pitch2.5mm 1x2 Pin Connector, PN#H510M02 Terminal), +DC14~24V Output, maximum power
supply up to 60 Watt for total; single channel power supply up to 30 Watt. DC level adjustable
mode should be concerned with high-level shaking situation.
* Power input for lighting using shall be higher than 80 Watts, and the output voltage shall be
between +DC24V~36V. *
Terminal
CH0
CH1
CH2
CH3
7. General I/O (CON1,DB37）:
Standard DB37 Female connector inserts, 4 x Trigger In (4x dedicated input channels, 24V
differential signal, with isolated.)
TI1+,TI1-, TI2+,TI2-,TI3+,TI3- ,TI4+,TI4-
---Combined to DB-37connector
4x Trigger Out (4x dedicated output channels, 24V differential signal, with isolated.)
TO1+, TO1-, TO2+, TO2-, TO3+, TO3-, TO4+, TO4-
---Combined to DB-37connector
16x High-speed General I/O, can switch to NPN or PNP through hardware, default NPN setting,
24V level Optocoupler isolation design.
GND_24V_GPIO, DO1, DO2, DO3, DO4, DO5, DO6, DO7, DO8
24V_GND_GPIO, DI1, DI2, DI3, DI4, DI5, DI6, DI7, DI8
---Combine to DB-37connector
Pin#
Signal
1
24V_OUT1
2
GND_OUT1
1
24V_OUT1
2
GND_OUT1
1
24V_OUT1
2
GND_OUT1
1
24V_OUT1
2
GND_OUT1
- 8 -
External Connection
CH0+
CH0-
CH1+
CH1-
CH2+
CH2-
CH3+
CH3-