Apogee Mini-DAC Setup Manual

Jelajahi secara online atau unduh pdf Setup Manual untuk Konverter Media Apogee Mini-DAC. Apogee Mini-DAC 1 halaman. Connnects
Juga untuk Apogee Mini-DAC: Manual Koneksi (1 halaman)

Halaman Cetak
Apogee Mini-DAC Setup Manual
ApogeeConnnects
Apogee

Hardware Connections

Hardware Settings
Set for
Set for desired
desired gain
sample rate
(up to 48kHz)
Software Settings
After making all the hardware connections, open Pro Tools
software. Under Setups select Hardware Setup.
In the Hardware Setup page, set Clock Source to S/PDIF,
and set Ch. 1-2 Input Source to S/PDIF.
As configured above, Pro Tools software inputs are routed
from the Mini-Me's hardware inputs, and Pro Tools software
ouputs are routed to both the MiniDAC's and MBox's
hardware outputs. Also, note that the MiniMe's DIR-USB
and MON knobs are not used.
: MiniMe - MiniDac - Digidesign MBox
Mic Input
(WE-XX-5.0)
S/PDIF
WE-RR-1.0
S/PDIF
WE-RR-1.0
S/PDIF CX
Analog Outs
(WE-XX-5.0)