Apogee Mini-DAC Kurulum Kılavuzu

Medya Dönüştürücü Apogee Mini-DAC için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Apogee Mini-DAC 1 sayfaları. Connnects
Ayrıca Apogee Mini-DAC için: Bağlantı Kılavuzu (1 sayfalar)

Sayfayı Yazdır
Apogee Mini-DAC Kurulum Kılavuzu
ApogeeConnnects
Apogee

Hardware Connections

Hardware Settings
Set for
Set for desired
desired gain
sample rate
(up to 48kHz)
Software Settings
After making all the hardware connections, open Pro Tools
software. Under Setups select Hardware Setup.
In the Hardware Setup page, set Clock Source to S/PDIF,
and set Ch. 1-2 Input Source to S/PDIF.
As configured above, Pro Tools software inputs are routed
from the Mini-Me's hardware inputs, and Pro Tools software
ouputs are routed to both the MiniDAC's and MBox's
hardware outputs. Also, note that the MiniMe's DIR-USB
and MON knobs are not used.
: MiniMe - MiniDac - Digidesign MBox
Mic Input
(WE-XX-5.0)
S/PDIF
WE-RR-1.0
S/PDIF
WE-RR-1.0
S/PDIF CX
Analog Outs
(WE-XX-5.0)