Acer Altos G700 series Petunjuk Pemasangan Rak - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan Rak untuk Server Acer Altos G700 series. Acer Altos G700 series 14 halaman. Acer desktop pc installation guide
Halaman Cetak
Installing the system into the rack
To install the system into the rack:
1
Remove the front bezel from the server. Refer to "Removing the
front bezel" on page 33 for instructions.
2
Remove the top panel of the server.
(1)
Use a screw driver to remove the two rear screws holding the
top panel to the chassis.
(2)
Slide the top panel backward to detach it from the chassis.
3
Remove the rubber foot stands from the server.
(1)
Lay the server on its side on a flat, stable surface.
(2)
Use the flat side of a screw driver to remove the plug from
the foot stands. Keep these plugs for later use.
105